Sale!

Water Propulsion System JetX-80V2

170,00 325,00 

Most advanced water thruster for electric surf.

Perfect size 80mm impeller inside for diy surf or kayak project. It can produce high thrust that will push you fast through the water.

Water Propulsion System JetX-80V2 is next generation of most advanced water thruster for electric surf with up to 50kg of thrust.

It features new and more stable design with two stage open loop water cooling system. First stage cools down the ceramic bearing and the shaft, and the second stage is used to cool down your electric or gasoline engine and your electronics. If you don’t need second stage you simply bypass it from outlet to inlet with a short tube. First stage is always in operational mode and takes care of the constant cooling of the bearing. With this cooling technique there is no need for external tube in the nozzle which then needs to be conducted inside the vessel.

 

Version V2 is upgraded with intake shield that will protect impeller from dirt and rocks. It is designed especially for JetX-80V2 model and it fits prefectly.

New impeller design gives us more thrust with low rpm range motors. With this setup we can get the same thrust with lower rpm.

You can attach your motor directly on the water propulsion system Jet-X80. This will help with easier shaft alignment. Feel free to contact us with details and we can make you custom motor mount or some other modifications.

Nozzle with 8 pole stator and ceramic bearing inside with an attitional cooling holes that keep bearing cooled down even at the highest rpm. Carbon Fiber impeller is standard.

All our parts are made with industrial 3D printers and high quality materials.

It includes two gaskets for the main housing and the nozzle. Bottom part needs to be glued with silicone to your wessel. If you use thruster with intake shield  you need to glue shield on to the thruster first. And then bottom part of the shield to your vessel and compress all together with 6 mounting bolts at the bottom.

 

Specs:

  • impeller size: 79mm
  • main housing size: L280mm x W137mm x H115mm
  • weight: 0.9kg
  • nozzle size: H65mm
  • 4mm thick walls of main housing
  • 4 mounting brass inserts for motor mount
  • 6 mounting brass inserts on the bottom for easier pump instalation
  • 5 brass inserts for nozzle attachment
  • 10mm inox 316 shaft ) A4 quality
  • flexible coupling 10-12mm
  • 2x high speed ceramic bearing
  • mechnical seal on the shaft
  • housing material: ASA
  • Impeller material: PET- Carbon Fibre
  • inox bolts
  • housing color: black
  • thrust: up to 50Kg
Weight N/A
Setup

Thruster with normal and steering nozzle, Thruster with normal and steering nozzle + intake shield, Thruster with normal nozzle, Thruster with normal nozzle and intake shield, Thruster with steering nozzle, Thruster with steering nozzle and intake shield, Thruster without any nozzle