Jet Thruster – JetX-100V3 Kit
Description
Jet Thruster – JetX-100V3 Kit is ready to install to any watercraft up to 4m of length. Engine with 8kW, 15kW and 25kW can be chosen when creating an order. Motor electronics (IMC350) can be throttle controlled via any controller that outputs PPM, ADC, NRF,UART,PAS signal. For easiest connection and throttle control, waterproof remote controll VX3 can be used.
Base plate attachment to boat hull/stern is performed by using 28 M5 bolts and applying marine grade silicone to base plate surface. Please note that electric motor and motor eletronics are not waterproof. For this reason we strongly recommend to design a boat hull the way that will allow protection against water splashing over the jet kit from above. The main pump hosing has silicone seal at the nozzle end. The bottom part has a groove where marine grade silicone is applied before bolting it down with 8 M5 bolts.
Kit will arrive with the limits set to the motor that will be chosen when making the purchse. Software settings can be adjsuted according to your needs. Settings like throttle curve, maximum power, battery limits, maximum rpm etc. can be set using VESC Tool. Programing cable is included.
After use in salt water we recommend to flow the pump chanells with a fresh water.
TECH DRAW: CLICK
INSTRUCTION MANUAL: CLICK
Kits are shipped from EU warehouse. Buyers from countries outside of the EU are responsible for paying import fees.
