Intelligent Motor Controller IMC350
Intelligent Motor Controller IMC350 is programmed via usb connection cable using VESC Tool software.
When programming, limitations of IMC350 motor controller must not be exceeded as permanent
damage may occur. Phase filtering needs to be turned off!
Sufficient flow of cold water through the IMC350 unit must be ensured to achieve good
cooling effect. The maximum current will depend on the cooling efficiency level. Performance of the IMC350 unit may decrease due to excessive
temperature safety switch.
If abnormal heat is generated during use, stop using the motor controller. If the motor
controller gets wet, turn off the power and dry it.
Specs:
● Voltage:16-84V( safe for 3-20S)
● Continuous Current : 50V/350A,75V/250A
● MaxInstantaneous Current :550A
● Supported sensors: ABI, HALL, AS5047,AS5048A
● EPRM:150000
● Phasefilter: NO- need to be turned off when programming!
● Size:200*94.6*50mm((Including the height of water pipes and electrolytic
capacitors)
● weight: 1.425kg
Features:
● Regenerative braking
● TheCPUadoptsthe 32F405 with the main frequency of 168MHz and the
Cortex-M4 architecture with DSP function;
● Sensored or sensorless operation + hybrid mode
● Configurable RPM-, current-, voltage- and power limits
● Input source: PPM, ADC, NRF,UART,PAS
● Communication ports: USB, CAN, UART,SPI,IIC
● Throttle curve and ramping for all input sources
● Seamless 4-quadrant operation
● Motorrevolution, ampere hour, watt hour counting
● Real-time data analysis and readout through the communication port.
● Adjustable protection against:
● Lowi nput voltage
● High input voltage
● High motor current
● High input current
● High regenerative braking current (separate limits for the motor and the input)
● High RPM(separate limits for each direction)
● Digital VCC and analog VCC are produced by different voltage regulators
respectively to make the system AD conversion more accurate
● Motorwire: 8AWG
● Powercable: 8AWG
● watercooling through aluminum heat sink- connection for 8mm cooling hose
● protection against water splash
Recommended motor: 8kW, 15kW, 25kW.
Get instruction manual here.
