Sale!

16S 75V 300A Electric Bldc Motor Controller

Original price was: 549,00 €.Current price is: 490,00 €.

16S 75V 300A Electric Bldc Motor Controller  is perfect for E- foil, or electric surf. Compatible with motors up to 25 kW (8kw– JetX-80, 15Kw-JetX-100V2, 25Kw-JetX-100V2), 66160, 66112, 70141, 70131, 56115, 56200,100106.

This controller is smart ESC that can be programmed according to your needs and desires including current limits, rpm limits, power limits and more. This controller is watercooled to prevent any overheat at higher loads. You can easily connect water hose from our JetX jet pump to it without any modifications. Our JetX jet pump will effectively cool it down while operational state.

75V 300A In CNC T6 Silicone Sealed Aluminum Enclosure – The most powerful programable electronic speed controller ever

16S 75V 300A Electric Bldc Motor Controller  is perfect for E- foil, or electric surf. Compatible with jet thrusters  (8kw– JetX-80, 15Kw-JetX-100V2, 25Kw-JetX-100V2), 66160, 66112, 70141, 70131, 56115, 56200,100106.

This Controller is smart ESC that can be programmed according to your needs and desires including current limits, rpm limits, power limits and more. This Controller is watercooled to prevent any overheat at higher loads. You can easily connect water hose from our JetX jet pump to it without any modifications. Our JetX jet pump will effectively cool it down while operational state.

Specifications:
  •  Voltage: 14V – 67V (Safe for 3S to 16S LiPo). Voltage spikes may not exceed 75V!
  • Phase Current: Continuous 200 A, Burst 450 A.  Values depend on the mounting, ambient temperature and air/water circulation around the device!
  • 5 V and 12 V 1 A output for external electronics.
  • 3.3 V 0,5 A output for external electronics.
  • Modes: DC, BLDC, FOC (sinusoidal)
  • Supported sensors: ABI, HALL, AS5047
  • up to 150 K ERPM drivable

Features:

  • Accurate current and voltage measurement on all motor phases (3 x phase shunts)
  • Regenerative braking
  • Sensored or sensorless operation + hybrid mode
  • Configurable RPM-, current-, voltage- and power limits
  • Input source: PPM, Analog, NRF Nyko Kama Nunchuck
  • Communication ports: USB, CAN, UART
  • Throttle curve and ramping for all input sources
  • Seamless 4-quadrant operation
  • Motor revolution, amp hour, watt hour counting
  • Real time data analysis and read out via communication ports
  • Adjustable protection against: low / high input voltage, high motor current, high input current, high regenerative braking current (separate limits for the motor and the input), high RPM (separate limits for each direction), over tempertaure (MOSFET and motor)

Check image guide how to use the 16S 75V 300A Electric Bldc Motor Controller.

EU buyers will receive motor from EU warehouse, so no import duties are required. Buyers from other countries must pay import duties.